How To Install A Gooseneck Hitch Plate

Gooseneck Hitch Installation How-To

8 Steps for Installing a Gooseneck Hitch

Installing a gooseneck hitch into your truck involves removing the spare tire, measuring and drilling a hole for the ball, bolting the brackets and hitch head into place and installing the operating handle. Some installations also require trimming a heat shield or fender liner.

In this helpful guide, nosotros will walk through step-by-step how to install a gooseneck hitch. Every gooseneck install is different. Remember to follow the manufacturer'southward instructions included with your particular hitch.

--

Looking for role-specific instructions? Check out our Installation Sheet Finder.

Need a professional person gooseneck install? Find a local installer on our Where to Buy folio.

Instance how to install a gooseneck hitch video

Step 1: Remove the spare tire and trim

Installing a gooseneck hitch requires access to the underside of your truck bed. Removing the spare tire will give you more room to work.

You may besides need to remove or even cut trim pieces on the truck to provide space for the gooseneck hitch. These may include the heat shield and the wheel well liners. Follow the instructions for your specific hitch to remove / trim only what is needed.

Footstep 2: Measure and drill the ball pigsty

Measure where the gooseneck ball pigsty will need to be cutting in your truck bed. The ball hole should be located above or slightly forrad of the rear truck beam, and centered between the wheel wells.

First, double-bank check and triple-check all measurements, according to the manufacturer instructions. And so, drill a pilot pigsty. Next, drill the total-size hole with the advisable hole saw. Finally, cover any exposed metal edges with touchup paint to help prevent corrosion.

Step 3: Insert the crossarm brackets

Insert the rear crossarm bracket from the rear wheel well access indicate. Be careful not to damage any brake lines or wiring!

In one case in position, centered on the truck frame, use a wrench to rotate the crossarm to the proper orientation. On some models, the bolt holes volition exist perpendicular with the truck bed, and on others, parallel.

Adjacent, insert the front crossarm bracket and position it as specified in the instruction manual.

Stride 4: Install the gooseneck center section

Prepare the gooseneck heart section to exist installed past attaching whatever necessary hardware.

And so, lift the center section into identify, under the truck bed. You may demand a friend to aid at this time. Gooseneck hitches can counterbalance as much as 50 pounds or more. Some hitches are specially designed to install with but one person; others are compatible with special installation tools to help elevator them into place.

In one case in place, attach the necessary hardware to secure the gooseneck eye section to the crossarm brackets.

Stride 5: Attach the side plate brackets

Attach the side plate brackets to the crossarms with the included hardware. These volition bolt into identify inside the wheel wells. On some trucks, fishwiring hardware through the frame may be necessary.

When attaching the side plates, make sure the gooseneck hitch is squared up with the truck frame. Install side plate brackets on both the driver side and passenger side.

Step 6: Torque the hardware

Torque the hardware on the gooseneck hitch to the values specified in the manufacturer's instructions. This includes basics and bolts on the center section, brackets and side plates.

Step seven: Install the safety chain anchors

To attach the safety concatenation anchors, holes will need to be drilled into the truck bed. Use the gooseneck eye section already installed every bit a template. Merely drill upward from underneath the bed.

With the holes drilled and touchup paint applied, drop in the safety chain loops and attach the necessary hardware.

Footstep 8: Install the operating handle

Get-go, install the locking pin mechanism for the gooseneck ball into the side of the ball hole. And then, slide the operating handle in through the wheel well access indicate, passing information technology through the hitch center section and into the locking pivot.

Attach the advisable fasteners, and test the operation of the ball. Besides, if a ball trim band is included with your hitch, install it at this time.

Finally, replace the spare tire and reinstall any factory trim pieces as specified in the instructions.

Dorsum to Gooseneck Installation Brackets

Source: https://www.curtmfg.com/gooseneck/installation-brackets/learn-more

Posted by: wilmotprought.blogspot.com

Share this post